SlabGasket Expansion Joint Replacement (+ XL Sizes) Sample Pack For Test Fitting

SlabGasket™ XL Expansion Joint Replacement Solution - Sample Pack
This Sample Pack includes all the Standard width samples, and also includes the XL sizes: 1 1/4”, 1 3/8”, 1 5/8”, and 1 5/8" Shorty Widths.
This Sample Pack of SlabGasket™
will allow you to test fit the various sizes of SlabGasket™ to insure a correct snug fit for your expansion joint replacements. This Free Sample Pack includes both Gray and Almond color samples. A small shipping charge will apply during checkout.
SlabGasket™
is designed to replace rotten wood expansion joints in parking lots, driveways, sidewalks, patios, slabs, and pool decks.
SlabGasket™
is used in residential, commercial, and institutional applications.
SlabGasket™
is an extruded, flexible pvc vinyl, the same material used in vinyl shutters, doors, windows, and siding. Immediately effective once installed, no waiting or curing is necessary.
Rapidly installed,
blending beautifully
with the existing concrete,
SlabGasket™
Expansion Joint Replacement also provides a simple and effective weed-growth deterrent and a
cure
for trip and fall hazards associated with empty expansion joints.
Available SlabGasket Colors
: Gray or Almond
SlabGasket™
is sold "By-The-Foot". QUANTITY = FEET.
How to select the correct size:
Use the
width
to select the proper fitting SlabGasket size. The height (tall) of each size is provided below only so that you can insure you have sufficient depth. Properly fitted SlabGasket will stay in place as set; SlabGasket does not need to extend the full depth of the expansion joint.
SlabGasket Sizes
Regular Heights:
1/2”
width x 2 1/8” tall
5/8”
width x 1 3/8” tall
3/4”
width x 1 5/8” tall
7/8”
width x 1 7/8” tall (replaces rotted 1x3 or 1x4)
1”
width x 1 1/8” tall
1 1/8”
width x 1 1/4” tall
The most common size is Regular height, 7/8” width x 1 7/8” tall.
SlabGasket Shorty Sizes
Shorty Heights*
1/2”
width x 1 1/8” tall
3/4”
width x 3/4” tall
7/8”
width x 7/8” tall
1 5/8”
width x 1 1/4” tall
* If you remove the rotted expansion joint and have less than 1 1/4” of depth, Shorty Height is usually the correct product to use.
SlabGasket XL Sizes
Regular Heights:
1 1/4”
width x 1 1/2” tall
1 3/8”
width x 1 1/4” tall
1 5/8”
width x 2” tall
1 7/8”
width x 1 1/4” tall**
2”
width x 1 1/4” tall**
**These sizes are not included in this Sample Pack.
The Free Sample Pack will include both Gray and Almond color samples.
SlabGasket Sample Packs are also available in the standard size range only, without XL sizes (Standard SlabGasket Sample Pack) for joints 1 1/8” or less in width.